Manual Dental Laser System

Manual Dental Laser System


Wavelength 810 nm +/- 10nm
Beam Divergence 25 (NA = 0,22)
Pulse Mode Power 1 – 4 W, Dependent On the Operation Mode
Continuous Power 1 – 4 W (CW)
Frequency 0.2-200Hz
Aiming Laser Laser Diode
Output Performance < 1 mW
Wave Length 635 nm
Transmitting System Hpcs Glass Fibre, Na = 0.37
Length 1 .5m
Voltage Supply 110 V AC, 50/60 Hz
Current Consumption 0.9 A
Protection Class 1 B, Not Waterproof, Flammable
Laser Cooling Unit Tec and Air-cool

Documents provided for device operator

  • Operating instructions
  • Inspection report
  • Warranty card

Manufacturer's liability

  • Setup and start up of the device is carried out by company staff or persons entitled by manufacturer to do so (obligatory subsequent to course).
  • Installation and safety measures comply with national standards and regulations.
  • The device is operated in accordance with the operating instructions.
  • No changes are made in the device or its accessories unless approved by the manufacturer.

A 12-month warranty is provided for the Dental laser system. If a deficiency is manifested within 12 months that is not the result of improper handling or operation, the right of the purchaser to subsequent repair and restitution shall be valid instead of the purchaser's right to price reduction or contract annulment

The following accessories are available for the laser system:

  • Instruction Manual
  • Fibre 400 μm
  • Footswitch
  • Interlock
  • Fibre holder
  • Power cable
  • Hand piece
  • Protective goggles

Yes! I am interested

Submit Your Requirement

Looking for "Manual Dental Laser System" ?